300-135 exam dumps

  • [May 2018] 100% Free Lead2pass 300-135 New Questions Download 195q

    100% New Updated 300-135 New Questions Lead2pass Helps Pass 300-135 Exam Successfully:

    https://www.lead2pass.com/300-135.html

    QUESTION 41
    The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, and FHRP services, a trouble ticket has been operated indicating that Client 1 cannot ping the 209.65.200.241 address.
    Use the supported commands to Isolated the cause of this fault and answer the following questions.
    On which device is the fault condition located?

    A.    R1
    B.    R2
    C.    R3
    D.    R4
    E.    DSW1
    F.    DSW2
    G.    ASW1
    H.    ASW2 (more…)

  • [April 2018] Lead2pass 300-135 New Questions For Passing The 300-135 Certification Exam 181q

    Lead2pass Cisco New Exam 300-135 VCE Files Free Instant Download:

    https://www.lead2pass.com/300-135.html

    QUESTION 21
    The following commands are issued on a Cisco Router:

    Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
    Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
    Router(configuration)#exit
    Router#debug ip packet 199

    What will the debug output on the console show?

    A.    All IP packets passing through the router
    B.    Only IP packets with the source address of 10.1.1.1
    C.    All IP packets from 10.1.1.1 to 172.16.1.1
    D.    All IP Packets between 10.1.1.1 and 172.16.1.1 (more…)

  • [February 2018] Ensure Pass 300-135 Exam By Training Lead2pass New PDF Dumps 137q

    Ensure Pass 300-135 Exam With Lead2pass New 300-135 Brain Dumps:

    https://www.lead2pass.com/300-135.html

    QUESTION 11
    Refer to the shown below.

    %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
    %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up

    What statement is correct regarding the output shown in the graphic?

    A.    These two log messages will not have a severity level.
    They are not errors but are just informational messages.
    B.    The first log message is categorized as a warning message.
    C.    These messages regarding interface status are normal output and will always be displayed when you exit config mode.
    D.    The first log message is an error message with a severity level of 3.
    E.    The second message would be shown if the logging console warning command had been issued.

    (more…)

  • [January 2018] 300-135 Latest Dumps Free Download From Lead2pass 137q

    Lead2pass Provides Latest Exam 300-135 Dumps VCE For Free Downloading:

    https://www.lead2pass.com/300-135.html

    QUESTION 1
    A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)

    (more…)

  • [2017 New] 300-135 Exam Dumps New Updated By Cisco Official Exam Center (76-90)

    2017 August Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Thank you so much Lead2pass. You helped me passing my 300-135 exam easily, 90% of the exam questions from the dump appeared in my exam.

    Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-135.html

    QUESTION 76
    The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened DSW1 will not become the active router for HSRP group 10.
    Use the supported commands to isolated the cause of this fault and answer the following questions.
    What is the solution to the fault condition?

    A.    Under the interface vlan 10 configuration enter standby 10 preempt command.
    B.    Under the track 1 object configuration delete the threshold metric up 1 down 2 command and enter the threshold metric up 61 down 62 command.
    C.    Under the track 10 object configuration delete the threshold metric up 61 down 62 command and enter the threshold metric up 1 down 2 command.
    D.    Under the interface vlan 10 configuration delete the standby 10 track1 decrement 60 command and enter the standby 10 track 10 decrement 60 command.

    (more…)

  • [2017 New] 300-135 Exam Dumps New Updated By Cisco Official Exam Center (61-75)

    2017 August Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    I was very confused about selecting the best practice test website when preparing for my 300-135 certification exam. Luckly, a friend told me about Lead2pass.com. I passed the 300-135 exam from the first try. Excellent website for free exam dumps!

    Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-135.html

    QUESTION 61
    The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
    Use the supported commands to isolated the cause of this fault and answer the following questions.
    What is the solution to the fault condition?

    A.    In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port- security interface configuration commands.
    Then in exec mode clear errdisable interface fa 1/01 – 2 vlan 10 command
    B.    In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port- security, followed by shutdown, no shutdown interface configuration commands.
    C.    In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port- security interface configuration commands.
    D.    In Configuration mode, using the interface range Fa 1/0/1 – 2, then no switchport port- security interface configuration commands.
    Then in exec mode clear errdisable interface fa 1/0/1, then clear errdisable interface fa 1/0/2 commands.

    (more…)

  • [2017 New] New Lead2pass Cisco 300-135 New Questions Free Download (46-60)

    2017 July Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Our dumps have been reviewed and approved by industry experts and individuals who have taken and passed 300-135 exam. Lead2pass will have you prepared to take 300-135 test with high confidence and pass easily. Whether you are looking for 300-135 study guide, 300-135 exam questions, 300-135 exam dump or 300-135 test, Lead2pass.com has you covered.

    Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-135.html

    QUESTION 46
    The implementations group has been using the test bed to do a `proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
    Use the supported commands to isolated the cause of this fault and answer the following questions.
    What is the solution to the fault condition?

    A.    In Configuration mode, using the interface range Fastethernet 1/0/1 ?2, then switchport mode access vlan 10 command.
    B.    In Configuration mode, using the interface range Fastethernet 1/0/1 ?2, then switchport access mode vlan 10 command.
    C.    In Configuration mode, using the interface range Fastethernet 1/0/1 ?2, then switchport vlan 10 access command.
    D.    In Configuration mode, using the interface range Fastethernet 1/0/1 ?2, then switchport access vlan 10 command.

    (more…)

  • [2017 New] New Lead2pass Cisco 300-135 New Questions Free Download (31-45)

    2017 July Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Whether you are a student attempting to pass 300-135 exam to be eligible for a post-graduate job, or a working professional hoping to improve your work credentials and earn that dream promotion Lead2pass is here to help. We have 300-135 exam dumps and brain dumps, so passing 300-135 exam is not an easy feat.

    Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-135.html

    QUESTION 31
    You have been brought in to troubleshoot an EIGRP network. A network engineer has made configuration changes to the network rendering some locations unreachable. You are to locate the problem and suggest solution to resolve the issue.

     

    R5 has become partially isolated from the remainder of the network. R5 can reach devices on directly connected networks but nothing else. What is causing the problem?

    A.    An outbound distribute list in R3
    B.    Inbound distribute lists in R5
    C.    An outbound distribute list in R6
    D.    Incorrect EIGRP routing process ID in R5

    (more…)

  • [2017 New] New Lead2pass Cisco 300-135 New Questions Free Download (16-30)

    2017 July Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Are you worrying about the 300-135 exam? Lead2pass provides the latest 300-135 braindumps and guarantees you passing 300-135 exam beyond any doubt.

    Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-135.html

    QUESTION 16
    Which two statements about the Cisco Aironet Desktop Utility (ADU) are true? (Select two)

    A.    The Aironet Desktop Utility (ADU) profile manager feature can create and manage only one profile for the wireless client adapter.
    B.    The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.
    C.    The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point, manage authentication to the wireless network, and enable encryption.
    D.    The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.

    (more…)

  • [2017 New] New Lead2pass Cisco 300-135 New Questions Free Download (1-15)

    2017 July Cisco Official New Released 300-135 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Amazing,100% candidates have passed the 300-135 exam by practising the preparation material of Lead2pass, because the braindumps are the latest and cover every aspect of 300-135 exam. Download the braindumps for an undeniable success in 300-135 exam.

    Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-135.html

    QUESTION 1
    A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)

     

    A.    RouterA received a hello packet with mismatched autonomous system numbers.
    B.    RouterA received a hello packet with mismatched hello timers.
    C.    RouterA received a hello packet with mismatched authentication parameters.
    D.    RouterA received a hello packet with mismatched metric-calculation mechanisms.
    E.    RouterA will form an adjacency with RouterB.
    F.    RouterA will not form an adjacency with RouterB.

    (more…)

  • Pages:  1 2
Posts navigation