[Full Version] Free Lead2pass 300-320 PDF Download 100% Pass Exam 300-320 (221-240)

[Full Version] Free Lead2pass 300-320 PDF Download 100% Pass Exam 300-320 (221-240)

2016 December Cisco Official New Released 300-320 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Since I recently passed the the Cisco 300-320 exam, it’s time for me to share the Lead2pass exam dumps I used when preparing for this exam.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-320.html

QUESTION 221
When considering the design of the E-Commerce topology which of the following are true?

A.    One-armed SLB design with multiple security contexts removes the need for a separate firewall in
the core layer
B.    Two-firewall-layer SLB design considers the aggregation and access layers to be trusted zones,
requiring no security between the web, application, and database zones
C.    One-armed SLB design with two firewall layers ensures that non load-balanced traffic still traverses the ACE so that the health and performance of the servers is still being monitored
D.    In all cases there will be configuration requirements for direct access to any servers or for nonload-balanced sessions initiated by the servers

Answer: A

QUESTION 222
Distinct, physical redundancy within a network layer is a key characteristic that contributes to the high availability of the hierarchical network design. Which of the following is not an examples of this model?

A.    SAN extension with dual fabrics such as a yellow VSAN and a blue VSAN utilized via multipath software
B.    Redundant power supplies and hot-swappable fan trays in Aggregate switches
C.    A single SAN fabric with redundant uplinks and switches
D.    Servers using network adapter teaming software connected to dual-attached access switches

Answer: C

QUESTION 223
Which four Cisco proprietary Spanning Tree Protocol enhancements are supported with rapid per- VLAN Spanning-Tree plus? (Choose four.)

A.    PortFast
B.    UplinkFast
C.    loop guard
D.    root guard
E.    BPDU guard
F.    BackboneFast

Answer: ACDE

QUESTION 224
Which two of these are correct regarding the recommended practice for distribution layer design? (Choose two.)

A.    use a redundant link to the core
B.    use a Layer 2 link between distribution switches
C.    never use a redundant link to the core because of convergence issues
D.    use a Layer 3 link between distribution switches with route summarization
E.    use a Layer 3 link between distribution switches without route summarization

Answer: AD

QUESTION 225
Which three of these Metro service types map to E-Line (versus E-LAN) services that are defined by the Metro Ethernet Forum (MEF)? (Choose three.)

A.    Ethernet Private Line
B.    Ethernet Wire Service
C.    Ethernet Relay Service
D.    Ethernet Multipoint Service
E.    Ethernet Relay Multipoint Service

Answer: ABC

QUESTION 226
Which two design concerns must be addressed when designing a multicast implementation? (Choose two.)

A.    only the low-order 23 bits of the MAC address are used to map IP addresses
B.    only the low-order 24 bits of the MAC address are used to map IP addresses
C.    only the high-order 23 bits of the MAC address are used to map IP addresses
D.    only the low-order 23 bits of the IP address are used to map MAC addresses
E.    the 0x01004f MAC address prefix is used for mapping IP addresses to MAC addresses
F.    the 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses

Answer: AF

QUESTION 227
Which two of these are characteristics of multicast routing? (Choose two.)

A.    multicast routing uses RPF.
B.    multicast routing is connectionless.
C.    In multicast routing, the source of a packet is known.
D.    When network topologies change, multicast distribution trees are not rebuilt, but use the original path
E.    Multicast routing is much like unicast routing, with the only difference being that it has a a group of receivers rather than just one destination

Answer: AC

QUESTION 228
Which of the following is most accurate with respect to designing high availability within the Enterprise Campus network?

A.    High availability at and between the Distribution and Access layers is as simple as redundant switches and redundant Layer 3 connections
B.    Non-deterministic traffic patterns require a highly available modular topology design
C.    Distribution layer high availability design includes redundant switches and Layer 3 equal-cost load sharing connections to the switched Access and routed Core layers, with a Layer 3 link between the Distribution switches to support summarization of routing information from the Distribution to the Core
D.    Default gateway redundancy allows for the failure of a redundant Distribution switch without affecting endpoint connectivity

Answer: D

QUESTION 229
Which of the following should the Enterprise Campus network designer consider with respect to Video traffic?

A.    While it is expected that the sum of all forms of video traffic will grow to over 90% by 2013, the
Enterprise will be spared this rapid adoption of video by consumers through a traditional top-down approach
B.    Avoid bandwidth starvation due to video traffic by preventing and controlling the wide adoption
of unsupported video applications
C.    Which traffic model is in use, the flow direction for the traffic streams between the application
components, and the traffic trends for each video application
D.    Streaming video applications are sensitive to delay while interactive video applications, using
TCP as the underlying transport, are fairly tolerant of delay and jitter

Answer: C

QUESTION 230
Which two design recommendations are most appropriate when OSPF is the data center core routing protocol? (Choose two.)

A.    Never use passive interfaces.
B.    Use NSSA areas from the core down.
C.    Use totally stub areas to stop type 3 LSAs.
D.    Use the lowest Ethernet interface IP address as the router ID.
E.    Manipulate the reference bandwidth.

Answer: BE

QUESTION 231
Which two design recommendations are most appropriate when EIGRP is the data center core routing protocol? (Choose two.)

A.    Summarize data center subnets.
B.    Advertise a default route into the data center core from the aggregation layer.
C.    Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D.    Adjust the default bandwidth value to ensure proper bandwidth on all links.

Answer: AB

QUESTION 232
Which three Layer 2 access designs have all of their uplinks in an active state? (Choose three.)

A.    Flex Links
B.    loop-free U
C.    looped square
D.    looped triangle
E.    loop-free inverted U

Answer: BCE

QUESTION 233
Which three statements about Network Attached Storage are correct? (Choose three.)

A.    Data is accessed using NFS or CIFS.
B.    Data is accessed at the block level.
C.    NAS is referred to as captive storage.
D.    Storage devices can be shared between servers.
E.    A NAS implementation is not as fast as a DAS implementation.

Answer: ADE

QUESTION 234
In a collapsed core design, which three benefits are provided by a second-generation Cisco MDS director? (Choose three.)

A.    a higher fan-out ratio
B.    fully redundant switches
C.    100 percent port efficiency
D.    all ISLs contained within a single chassis
E.    higher latency and throughput than a core-edge design switch

Answer: BCD

QUESTION 235
Which two statements about both FCIP and iSCSI are correct? (Choose two.)

A.    They support file-level storage for remote devices.
B.    They require high throughput with low latency and low jitter.
C.    Their purpose is to provide connectivity between host and storage.
D.    They support block-level storage for remote devices.
E.    Their purpose is to provide connectivity between separate wide-area SANs.

Answer: BD

QUESTION 236
Which three statements about zoning are correct? (Choose three.)

A.    Zoning increases security.
B.    DNS queries are used for software zoning.
C.    Software zoning is more secure than hardware zoning.
D.    When using zones and VSANs together, the zone is created first.
E.    Zoning requires that VSANs be established before it becomes operational.

Answer: ABE

QUESTION 237
What are two characteristics of Server Load Balancing router mode? (Choose two.)

A.    The design supports multiple server subnets.
B.    An end-user sees the IP address of the real server.
C.    SLB routes between the outside and inside subnets.
D.    The source or destination MAC address is rewritten, but the IP addresses left alone.
E.    SLB acts as a "bump in the wire" between servers and upstream firewall or Layer 3 devices.

Answer: AC

QUESTION 238
What are two characteristics of Cisco Global Site Selector? (Choose two.)

A.    It helps verify end-to-end path availability.
B.    It provides traffic rerouting in case of disaster.
C.    HSRP, GLBP, and VRRP can be clients of GSS.
D.    BGP must be the routing protocol between the distributed data centers.
E.    DNS responsiveness is improved by providing centralized domain management.

Answer: BE

QUESTION 239
Drag and Drop Question

Answer:

QUESTION 240
Drag and Drop Question

Answer:

I hope Lead2pass exam questions from the Cisco 300-320 exam helps you pass the exam and earn your Cisco certification! Happy Studying!

300-320 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDdnA2R2ZwUDFuY2M

2016 Cisco 300-320 exam dumps (All 356 Q&As) from Lead2pass:

http://www.lead2pass.com/300-320.html [100% Exam Pass Guaranteed]

         

Author: admin