This page was exported from Latest Lead2pass Dumps For Sharing [ https://www.ensurepass.net ]
Export date: Fri Mar 29 15:03:52 2024 / +0000 GMT

Free Lead2pass 70-412 PDF and VCE Dumps — 100 Percent Pass Guarantee (141-150)



Passing Microsoft 70-412 exam questions is guaranteed with Lead2pass. Lead2pass provides a great deal of Microsoft 70-412 preparation resources mend to step up your career with the endorsement of technical proficiency. The earlier you use Lead2pass products, the quicker you pass you 70-412 exam.

QUESTION 141
Your network contains an Active Directory forest named contoso.com.
The forest contains a single domain. The domain contains three domain controllers.
The domain controllers are configured as shown in the following table.

wpsEBFE.tmp

You discover that when you run Group Policy Results from Group Policy Management, the settings from site-linked Group Policy objects (GPOs) fail to appear in the results.
You need to ensure that the settings from site-linked GPOs appear in the results.
What should you do first?

A.    Run adprep on DC3 by using Windows Server 2012 R2 installation media.
B.    Transfer the infrastructure master role to DC3.
C.    Upgrade DC2 to Windows Server 2012 R2.
D.    Run adprep on DC1 by using Windows Server 2003 installation media.

Answer: A
QUESTION 142
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 is configured to use a DNS server from an Internet Service Provider (ISP) as a forwarder. Corporate management requires that client computers only resolve names of
contoso.com computers.
You need to configure Server1 to resolve names in the contoso.com zone only.
What should you do on Server1?

A.    From DNS Manager, modify the root hints of Server1.
B.    From Windows PowerShell, run the Remove-DnsServerForwarder cmdlet.
C.    From Windows PowerShell, run the Set-NetDnsTransitionConfiguration cmdlet.
D.    From DNS Manager, modify the Advanced properties of Server1.

Answer: A

Explanation:
If the DNS server does not know the address of the requested site, then it will forward the request to another DNS server. In order to do so, the DNS server must know of the IP address of another DNS server that it can forward the request to. This is the job of root hints. Root hints provides a list of IP addresses of DNS servers that are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server).
http://technet.microsoft.com/en-us/library/ee649221(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj649867.aspx
http://technet.microsoft.com/en-us/library/jj613703.aspx

QUESTION 143

You have a server named Server1 that runs Windows Server 2012 R2.
Each day, Server1 is backed up fully to an external disk.
On Server1, the disk that contains the operating system fails.
You replace the failed disk.
You need to perform a bare-metal recovery of Server1 by using the Windows Recovery
Environment (Windows RE).
What should you use?

A.    The Wbadmin.exe command
B.    The Repair-bde.exe command
C.    The Get-WBBareMetalRecovery cmdlet
D.    The Start-WBVolumeRecovery cmdlet

Answer: A

Explanation:
A. Enables you to back up and restore your operating system, volumes, files, folders, and
applications from a command prompt.
B. Accesses encrypted data on a severely damaged hard disk if the drive was encrypted by using BitLocker. Repair-bde can reconstruct critical parts of the drive and salvage recoverable data as long as a valid recovery password or recovery key is used to decrypt the data.
C. Gets the value that indicates whether the ability to perform bare metal recoveries from backups has been added to the backup policy (WBPolicy object).
D. Starts a volume recovery operation.

QUESTION 144
You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. Server1 has a volume named D that contains user data. Server1 has a volume named E that is empty. Server1 is configured to create a shadow copy of volume D every hour.
You need to configure the shadow copies of volume D to be stored on volume E.
What should you run?

A.    The Set-Volume cmdlet with the -driveletter parameter
B.    The Set-Volume cmdlet with the -path parameter
C.    The vssadmin.exe add shadowstorage command
D.    The vssadmin.exe create shadow command

Answer: C
Explanation:
A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a letter used to identify a drive or volume in the system.
B. Sets or changes the file system label of an existing volume -Path Contains valid path information. C. Displays current volume shadow copy backups and all installed shadow copy writers and providers. AddShadowStroage Adds a shadow copy storage association for a specified volume.
D. Displays current volume shadow copy backups and all installed shadow copy writers and providers. Shadow Creates a new shadow copy of a specified volume.
http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx

QUESTION 145
Your network contains an Active Directory forest named contoso.com.
All servers run Windows Server 2012 R2.
The domain contains four servers.
The servers are configured as shown in the following table.

wps7AC6.tmp

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should you install IPAM?

A.    DC1
B.    DC2
C.    DC3
D.    Server1

Answer: D
QUESTION 146
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 is backed up by using Windows Server Backup.
The backup configuration is shown in the exhibit.

wpsF801.tmp

You discover that only the last copy of the backup is maintained.
You need to ensure that multiple backup copies are maintained.
What should you do?

A.    Modify the backup destination.
B.    Configure the Optimize Backup Performance settings.
C.    Modify the Volume Shadow Copy Service (VSS) settings.
D.    Modify the backup times.

Answer: A

QUESTION 147
You have a server named Server1 that runs Windows Server 2012 R2. Server1 is located in the perimeter network and has the DNS Server server role installed. Server1 has a zone named contoso.com.
You apply a security template to Server1. After you apply the template, users report that they can no longer resolve names from contoso.com. On Server1, you open DNS Manager as shown in the DNS exhibit. (Click the Exhibit button.)

wps4805.tmp

On Server1, you open Windows Firewall with Advanced Security as shown in the Firewall exhibit. (Click the Exhibit button.)

wps891B.tmp

You need to ensure that users can resolve contoso.com names.
What should you do?

A.    From Windows Firewall with Advanced Security, disable the DNS (TCP, Incoming) rule and the DNS (UDP, Incoming) rule.
B.    From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.
C.    From DNS Manager, unsign the contoso.com zone.
D.    From DNS Manager, modify the Start of Authority (SOA) of the contoso.com zone.
E.    From Windows Firewall with Advanced Security, modify the profiles of the DNS (TCP, Incoming) rule and the DNS (UDP, Incoming) rule.

Answer: E

QUESTION 148
Your network contains an Active Directory domain named corp.contoso.com.
You deploy Active Directory Rights Management Services (AD RMS).
You have a rights policy template named Template1. Revocation is disabled for the template.
A user named User1 can open content that is protected by Template1 while the user is connected to the corporate network. When User1 is disconnected from the corporate network, the user cannot open the protected content even
if the user previously opened the content.
You need to ensure that the content protected by Template1 can be opened by users who are disconnected from the corporate network.
What should you modify?

A.    The User Rights settings of Template1
B.    The templates file location of the AD RMS cluster
C.    The Extended Policy settings of Template1
D.    The exclusion policies of the AD RMS cluster

Answer: C
Explanation:
C. You can add trust policies so that AD RMS can process licensing requests for content that was rights protected
http://technet.microsoft.com/en-us/library/ee221071(v=ws.10).aspx

QUESTION 149
Your company recently deployed a new Active Directory forest named contoso.com.
The forest contains two Active Directory sites named Site1 and Site2.
The first domain controller in the forest runs Windows Server 2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?

A.    Active Directory Sites and Services
B.    DFS Management
C.    Repadmin
D.    Dfsrdiag

Answer: D
Explanation:
D. In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command.
You can force polling by using the Dfsrdiag PollAD command.
http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072

QUESTION 150
You have 30 servers that run Windows Server 2012 R2.
All of the servers are backed up daily by using Windows Azure Online Backup.
You need to perform an immediate backup of all the servers to Windows Azure Online Backup. Which Windows PowerShell cmdlets should you run on each server?

A.    Get-OBPolicy | StartOBBackup
B.    Start-OBRegistration | StartOBBackup
C.    Get-WBPolicy | Start-WBBackup
D.    Get-WBBackupTarget | Start-WBBackup

Answer: A
Explanation:
A. starts a backup job using a policy
B. Registers the current computer to Windows Azure Backup.
C. Not using Azure
D. Not using Azure
http://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770426.aspx
http://technet.microsoft.com/en-us/library/hh770398.aspx

70-412 Exam patterns and prevailing format are deeply emphasized by professionals of Lead2pass and they strive to deliver the ultimate assistance for customers leading them to gain significant benefits. If you want to pass 70-412 exam quickly, Lead2pass will be your best choice.

http://www.lead2pass.com/70-412.html

 

 


Post date: 2014-12-15 02:22:07
Post date GMT: 2014-12-15 02:22:07
Post modified date: 2014-12-15 02:22:07
Post modified date GMT: 2014-12-15 02:22:07

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com