70-743 New Questions

  • [May 2018] Free Download 70-743 Exam Dumps VCE From Lead2pass 237q

    Free Download Lead2pass Microsoft 70-743 VCE And PDF Dumps:

    https://www.lead2pass.com/70-743.html

    QUESTION 121
    You deploy two servers that run Windows Server 2016.
    You install the Failovers Clustering feature on both servers.
    You need to create a workgroup cluster.
    What should you do?

    A.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of None.
    B.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    C.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    D.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of None. (more…)

  • [March 2018] Free Share Of Lead2pass 70-743 VCE And PDF Dumps

    Free Sharing Of Microsoft 70-743 Brain Dumps From Lead2pass:

    https://www.lead2pass.com/70-743.html

    QUESTION 111
    Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

    Your network contains Windows and non-Windows devices.
    You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
    You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
    What should you do?

    A.    From the properties of Scope1, modify the Conflict detection attempts setting.
    B.    From the properties of Scope1, configure Name Protection.
    C.    From the properties of IPv4, configure the bindings.
    D.    From IPv4, create a new filter.
    E.    From the properties of Scope1, create an exclusion range.
    F.    From IPv4 run the DHCP Policy Configuration Wizard.
    G.    From Control Panel, modify the properties of Ethernet.
    H.    From Scope1, create a reservation. (more…)

  • [2018-2-11] Lead2pass Free Microsoft 70-743 Braindumps VCE Updated

    Free Version Lead2pass Microsoft 70-743 PDF Dumps With Exam Questions Download.v.2018-2-11.237q:

    https://www.lead2pass.com/70-743.html

    QUESTION 188
    You have an Active Directory forest that contains 30 servers and 6,000 Client computers.
    You deploy a new DHCP server that runs Windows Server 2016.
    You need to retrieve the list of the authorized DHCP servers.
    Which command should you run?

    A.    Get-DHCPServerDatabase
    B.    Netstat -p IP -s -a
    C.    Get-DHCPServerInDc
    D.    Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo (more…)

  • [February 2018] Lead2pass New Released Microsoft 70-743 Exam Questions From Microsoft Exam Center 187q

    Lead2pass Offering New 70-743 Exam PDF And 70-743 Exam VCE Dumps For Free Downloading:

    https://www.lead2pass.com/70-743.html

    QUESTION 101
    You have a server named Server1 that runs Windows Server 2016.
    Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
    You create a virtual disk named Disk 1 that uses a mirrored layout.
    You create a partition named Partition1 that uses all of the available space on Disk 1.
    You need to extend Partition1.
    What should you do first?

    A.    From Windows PowerShell, run the Resize-VirtualDisk cmdlet.
    B.    From Windows PowerShell, run the Resize-StorageTier cmdlet.
    C.    From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.
    D.    From Disk Management, modify the properties of Partition1. (more…)

  • [Q71-Q78] 2018 Exam 70-743 Dumps From Lead2pass Cover All New 70-743 New Questions

    2018 Lead2pass New Updated 70-743 Exam Questions:

    https://www.lead2pass.com/70-743.html

    QUESTION 71
    In this section, you’ll see one or more sets of questions with the same scenario and problem.
    Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem.
    It is also possible that none of the solutions solve the problem.
    Once you answer a question in this section, you will NOT be able to return to it.
    As a result, these questions will not appear in the review screen.
    Note: This question is part of a series of questions that present the same scenario.
    Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. (more…)

  • [2017-11-30] 2017 Exam 70-743 Dumps From Lead2pass Cover All New 70-743 New Questions (161-170)

    New Lead2pass 70-743 Exam Questions Guarantee 70-743 Certification Exam 100% Success.v.2017-11-30.187q

    Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-743.html

    QUESTION 161
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
    After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
    Server1 is configured to allow domain users to establish VPN connections from 06:00 to
    18:00 everyday of the week.
    You need to ensure that domain users can establish VPN connections only between Monday and Friday.
    Solution: From Routing and Remote Access, you configure the Properties of Server1.
    Does this meet the goal? (more…)

  • [2017-11-30] 2017 Exam 70-743 Dumps From Lead2pass Cover All New 70-743 New Questions (152-160)

    New Updated Lead2pass Microsoft 70-743 Braindump Free Download.v.2017-11-30.187q

    Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-743.html

    QUESTION 152
    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
    After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

    You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
    Server1 and VM1 run Windows Server 2016.
    The settings for VM1 are configured as shown in the exhibit below.

    1521

    You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
    Solution: You need to enable the Data Exchange integration service for VM1.
    Does this meet the goal?

    A.    YES
    B.    NO (more…)

  • [Lead2pass New] 2017 Updated Lead2pass Microsoft 70-743 Exam Questions (121-130)

    2017 October Microsoft Official New Released 70-743 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    We Lead2pass.com are providing 70-743 exam braindumps here in both PDF file and Online Practice Test Formats. The 70-743 dumps are updated time to time having all the questions answers which cover complete course outlines of the 70-743 certification exam.

    Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-743.html

    QUESTION 121
    You deploy two servers that run Windows Server 2016.
    You install the Failovers Clustering feature on both servers.
    You need to create a workgroup cluster.
    What should you do?

    A.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of None.
    B.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    C.    Create matching local administrative accounts on both of the servers. Assign the same primary DNS suffix to both of the servers. Run the New-Cluster cmdlet and specify an administrative access point of DNS.
    D.    Configure both of the server to be in a workgroup named Workgroup. Configure the Cluster Service to log on as Network Service. Run the New-Cluster cmdlet and specify an administrative access point of None.

    (more…)

  • [Lead2pass New] 2017 Updated Lead2pass Microsoft 70-743 Exam Questions (111-120)

    2017 October Microsoft Official New Released 70-743 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    Thank you so much Lead2pass. You helped me passing my 70-743 exam easily, 90% of the exam questions from the dump appeared in my exam.

    Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-743.html

    QUESTION 111
    Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

    Your network contains Windows and non-Windows devices.
    You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
    You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
    What should you do?

    A.    From the properties of Scope1, modify the Conflict detection attempts setting.
    B.    From the properties of Scope1, configure Name Protection.
    C.    From the properties of IPv4, configure the bindings.
    D.    From IPv4, create a new filter.
    E.    From the properties of Scope1, create an exclusion range.
    F.    From IPv4 run the DHCP Policy Configuration Wizard.
    G.    From Control Panel, modify the properties of Ethernet.
    H.    From Scope1, create a reservation.

    (more…)

  • [Lead2pass New] 2017 Updated Lead2pass Microsoft 70-743 Exam Questions (101-110)

    2017 October Microsoft Official New Released 70-743 Dumps in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    I was very confused about selecting the best practice test website when preparing for my 70-743 certification exam. Luckily, a friend told me about Lead2pass.com. I passed the 70-743 exam from the first try. Excellent website for free exam dumps!

    Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-743.html

    QUESTION 101
    You have a server named Server1 that runs Windows Server 2016.
    Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
    You create a virtual disk named Disk 1 that uses a mirrored layout.
    You create a partition named Partition1 that uses all of the available space on Disk 1.
    You need to extend Partition1.
    What should you do first?

    A.    From Windows PowerShell, run the Resize-VirtualDisk cmdlet.
    B.    From Windows PowerShell, run the Resize-StorageTier cmdlet.
    C.    From Windows PowerShell, run the Expand-IscsiVirtualDisk cmdlet.
    D.    From Disk Management, modify the properties of Partition1.

    (more…)

  • Pages:  1 2 3 4
Posts navigation