Daily Archives: Wednesday, July 13, 2016

  • [2016-New] Lead2pass New Updated HP0-S43 Braindump Free Get

    2016 July HP Official New Released HP0-S43 Q&As in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    How to 100% pass HP0-S43 exam? Lead2pass provides the guaranteed HP0-S43 exam preparation material to boost up your confidence in HP0-S43 exam. Successful candidates have provided their reviews about our HP0-S43 dumps. Now Lead2pass supplying the new version of HP0-S43 VCE and PDF dumps. We ensure our HP0-S43 exam questions are the most complete and authoritative compared with others’, which will ensure your HP0-S43 exam pass.

    Following questions and answers are all new published by HP Official Exam Center: http://www.lead2pass.com/hp0-s43.html

    QUESTION 1
    A customer needs to improve VM host efficiency and lowei network latency in their HP ProLiant DL380 Gen9 servers.
    Which unique technology built-in to the HP FlexFabric 556 network adapter wilt meet the customer’s requirement?

    A.    TCP/IP Offload Engine (TOE)
    B.    IPv6 protocol support
    C.    10Gb Ethernet support
    D.    ROMA over Converged Ethernet (ROCE)

    (more…)

  • [2016-New] Download Free SAP E_HANAAW151 Tests Questions And Answers From Lead2pass

    2016 July SAP Official New Released E_HANAAW151 Q&As in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    After purchasing the dumps for the E_HANAAW151 Exam from Lead2pass, I had no doubt that I’d easily pass the exam. Bundle of thanks to Lead2pass for helping me pass the exam without any troubles.

    Following questions and answers are all new published by SAP Official Exam Center: http://www.lead2pass.com/e-hanaaw151.html

    QUESTION 1
    What are the steps involved in SAP HANA Evolution?
    There are 3 correct answers to this question.
    Response:

    A.    ABAP can access SAP HANA
    B.    ABAP can run on SAP HANA
    C.    Optimized ABAP on SAP HANA
    D.    ABAP applications on SAP HANA
    E.    ABAP as accelerator on SAP HANA

    (more…)

  • [2016-New] Lead2pass Cisco 400-051 VCE And PDF Instant Download (396-406)

    2016 July Cisco Official New Released 400-051 Q&As in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    2016 timesaving comprehensive guides for Cisco 400-051 exam: Using latest released Lead2pass 400-051 practice tests questions, quickly pass 400-051 exam 100%! Following questions and answers are all new published by Cisco Official Exam Center!

    Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/400-051.html

    QUESTION 396
    Refer to the exhibit. An engineer is trying to provision CUCME with three 8841 phones.
    However all phone fail to register.
    Which two changes in the configuration would allow the phones to register? (Choose two)

    A.    The registrar server command must be added under the voice register global configuration
    B.    The IP address trusted authenticate command must be added under voice service voip
    C.    The source-address command must be added under the voice register global configuration
    D.    The local SIP proxy address must be configuration under the sip-ua configuration
    E.    The registrar server command must be added under the sip section of voice service voip

    Answer: CE

    QUESTION 397
    A collaboration engineer has been asked to implement secure real-time protocol between a Cisco Unified CM and SIP gateway. Which option is a consideration for this implementation?

    A.    Only T.38 and Cisco fax protocol are supported
    B.    SIP require the all the time be sent in GMT
    C.    Call hold RE-INVITE is not supported
    D.    SRTP is supported only in cisco IOS 15.x and higher

    Answer: B

    QUESTION 398
    Refer to the exhibit. A collaboration engineer configures Cisco Unified CM location using G.711 and iLBC for each site. The bandwidth for each link is shown. Which two options represent the maximum concurrent number of calls supported from Grand Junction to Casper for each Codec?
    (Choose two)

    A.    20 G.711 calls
    B.    18 G.711 calls
    C.    36 iLBC calls
    D.    42 iLBC calls
    E.    11 G.711 calls
    F.    51 iLBC calls

    Answer: CE

    QUESTION 399
    A collaboration engineer is troubleshooting an MOH problem on a Cisco IOS SIP gateway. While searching through a debug ccsip message output, which three parameters in the SIP messages can be used to determine if the call was placed on hold? (Choose three)

    A.    OPTIONS WITH 301 CALLHOLD
    B.    INVITE WITH a=INACTIVE
    C.    INVITE WITH a=SENDONLY
    D.    OPTION WITH c=INACTIVE
    E.    c=IN IP4 0.0.0.0
    F.    BYE WITH A = CALLHOLD

    Answer: BCE

    QUESTION 400
    Refer to the exhibit. A cisco collaboration engineer discovers that an instance of IOS media termination point (MTP) could not maintain stable registration with CUCM. Call manager traces is showing in the exhibit. What is the reason for the flapping registration?

    A.    The CCM version on IOS configuration does not match the CUCM version.
    B.    The IOS MTP is experiencing high CPU and is missing its keep-alive.
    C.    A Firewall is blocking port 2000 intermittently between IOS Device and CUCM.
    D.    Another IOS Media device is attempting to register with the same name.

    Answer: D

    QUESTION 401
    A collaboration engineer is designing Cisco IM&P implementation to support instant messaging logging for compliance.
    Which two external databases can be used to support that functionality? (Choose two.)

    A.    Oracle database
    B.    MySQL database
    C.    Microsoft SQL database
    D.    PostgreSQL database
    E.    Informix SQL database

    Answer: AD

    QUESTION 402
    Refer to the exhibit. A cisco collaboration engineer is troubleshooting a gateway and gatekeeper problem and sees this output from a debug command.
    Which two configuration can cause this problem? (Choose two)

    A.    The same zone prefix is configured in two different gatekeepers
    B.    The same H323-ID is configured in two different gateways
    C.    The same gw-type-prefix is configured in two different zone subnets IDs
    D.    The same zone subnet ID is configured in two different gatekeepers
    E.    The same E164-ID is configured in two different gateways

    Answer: BE

    QUESTION 403
    The Cisco Unified Border Element is configured using high availability with the Hot Standby Routing Protocol. Which two pieces of information can be gathered about the calls traversing these border elements? (Choose two.)

    A.    The total number of calls is 150.
    B.    The number of non-native calls is 70.
    C.    The number of native calls is 50.
    D.    The number of calls preserved is 220.
    E.    The total number of active calls is 100.

    Answer: AB

    QUESTION 404
    Refer to the exhibit. Which two SIP packet handing behaviour will result with this cisco Unified Border Element (CUBE) configuration? (Choose two)

    A.    Unsupported content/MIME pass-through
    B.    SIP Refer is not support when received on this CUBE
    C.    Privacy headers received on SIP message will be replaced with NON-privacy headers on this CUBE
    D.    P-Preferred identities
    E.    Mid-call codec changes

    Answer: AE

    QUESTION 405
    A CUCM engineer has deployed Type B SIP Phones on a remote site and no SIP dial rules were deployed for these phones. How Will CUCM receive the DTMF after the phone goes off- hook and the button are pressed?

    A.    Each digit will be received by CUCM in a SIP NOTIFY message as soon as they are pressed
    B.    The first digit will be received in a sip invite and subsequent digits will be received using NOTIFY message as soon as they are pressed.
    C.    Each digit bill be received by CUCM in a SIP INVITE as soon as the dial soft key has been pressed.
    D.    All digits will be received by CUCM in a SIP INVITE as soon as the dial soft key has been pressed

    Answer: A

    QUESTION 406
    The Video engineer wants to enable the LATM codec to allow video endpoint to communicate over audio With other IP devices Which two Characteristic should the voice engineer be aware of before enabling LATM on the Cisco Unified border element router? (Choose two)

    A.    Dual tone Multi-frequency interworking with LATM codec is not supported
    B.    Codec transcoding between LATM and other codecs is not supported
    C.    SIP UPDATE message outlined in RFC3311 is not supported
    D.    Box-to-Box High availability support feature is not supported
    E.    Configure LATM under a voice class or dial peer is not supported
    F.    Basic calls using flow-around or flow-through is not supported

    Answer: AB

    Lead2pass is confident that our NEW UPDATED 400-051 exam questions and answers are changed with Cisco Official Exam Center. If you cannot pass 400-051 exam, never mind, we will return your full money back! Visit Lead2pass exam dumps collection website now and download 400-051 exam dumps instantly today!

    2016 Cisco 400-051 exam dumps (All 454 Q&As) from Lead2pass:

    http://www.lead2pass.com/400-051.html [100% Exam Pass Guaranteed!!!]

  • 2016 New Lead2pass Microsoft 70-243 Practice Tests Free Download (155-159)

    2016 July Microsoft Official New Released 70-243 Q&As in Lead2pass.com!

    100% Free Download! 100% Pass Guaranteed!

    I have already passed Microsoft 70-243 certification exam yesterday….Scored 984/1000 in US! Many new exam questions added into the 2016 70-243 test! So I just come here to share with your guys and wish more 70-243 candidates can pass easily!

    Following questions and answers are all new published by Microsoft Official Exam Center: http://www.lead2pass.com/70-243.html

    QUESTION 155
    Hotspot Question
    You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. The deployment contains the servers configured as shown in the following table.

    1551
    You are troubleshooting the hardware inventory flow from a Windows 8.1 computer named Client1.
    You need to verify whether the following events have occurred:
    – The inventory files were uploaded from Client1.
    – The inventory data was added to the site database.
    Which log should you verify for each event? To answer, select the appropriate options in the answer area.
    1552
    Answer:
    1553
    Explanation:
    * Box 1:
    MP_Hinv.log records details about the conversion of XML hardware inventory records from clients and the copy of those files to the site server.
    * Box 2:
    dataldr.log records information about the processing of Management Information Format (MIF) files and hardware inventory in the Configuration Manager database.
    Is placed on the site server.
    Incorrect:
    * Invproc.log
    Records the forwarding of MIF files from a secondary site to its parent site.
    Is placed on the secondary site server.
    * Datatransferservice.log
    Records all BITS communication for policy or package access. This log is also used for content management by pull-distribution points.
    Is placed on a computer that is configured as a pull-distribution point.
    https://technet.microsoft.com/en-us/library/hh427342.aspx

    QUESTION 156
    You have a server named Server1 that runs Windows Server 2012 R2.
    You plan to install System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) on Server1.
    You need to install the prerequisites on Server1.
    Which three features should you install from the Windows Assessment and Deployment Kit for Windows 8.1? Each correct answer presents part of the solution.

    A.    Deployment Tools
    B.    User State Migration Tool (USMT)
    C.    Application Compatibility Toolkit (ACT)
    D.    Windows Preinstallation Environment (Windows PE)
    E.    Windows Assessment Services
    F.    Microsoft SQL Server 2012 Express
    G.    Volume Activation Management Tool (VAMT)
    H.    Windows Performance Toolkit

    Answer: ABD
    Explanation:
    When choosing the features to install make sure that you install at least the Deployment Tools, Windows Preinstallation Environment (Windows PE), and User State Migration Tool (USMIT). The screenshot does not show the addition of USMT ?but that is a requirement.
    http://www.systemcentercentral.com/upgrading-configuration-manager-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/

    QUESTION 158
    Drag and Drop Question
    Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment.
    You need to create a collection that excludes all of the client computers that have Microsoft Office 2013 installed.
    Which four actions should you perform in sequence to create the query for the collection? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
    1581
    Answer:
    1582
    Answer:
    Select is not in as the operator – 4
    Display the estimated execution plan
    Create a query that returns all of the client computers that have Office 2013 installed – 1
    Modify the query to use only indexed tables that are returned by the estimated execution plan – 3
    Create a query-based collection that uses the sub selected values options
    Browse to the query and select the query – 2

    QUESTION 159
    You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment.
    In the Configuration Manager inventory, you need to include the desk number where each client computer is located.
    Which two actions should you perform? Each correct answer presents part of the solution.

    A.    On each computer, create a Noidmif.mif file.
    B.    Enable an existing hardware inventory class.
    C.    Modify the Default Client Settings.
    D.    Add an Asset Intelligence synchronization point.
    E.    On each computer, create an Idmif.mif file.

    Answer: AB
    Explanation:
    How to Extend Hardware Inventory in Configuration Manager
    A: Use NOIDMIF files to collect information about client devices that cannot be inventoried by Configuration Manager. For example, you might want to collect device asset number information that exists only as a label on the device. NOIDMIF inventory is automatically associated with the client device that it was collected from.
    B: You can enable or disable the default inventory classes used by Configuration Manager or you can create custom client settings that allow you to collect different hardware inventory classes from specified collections of clients.
    https://technet.microsoft.com/en-us/library/gg712290.aspx

    Pass 70-243 is not difficult! But you need more practice tests, I spent 1 month prepared for this exam! Here is full version of the exam dump, I want to share with you, maybe it can help you a little bit:

    2016 Microsoft 70-243 exam dumps (All 167 Q&As) from Lead2pass:

    http://www.lead2pass.com/70-243.html [100% Exam Pass Guaranteed!!!]